8/8/2017 7:27 PM | |
Posts: 10 Rating:
|
Hi sorry my English is bad... I have problem with iol_device. I would like conect with balluff led light by plc that change her frequency and I Think that the best option is this doing by iol_decice but He show me a lot of errors and i dont konw well how configuration this block. Could you help me ?? |
8/8/2017 7:53 PM | |
Joined: 9/27/2006 Last visit: 3/14/2025 Posts: 12344 Rating:
|
Hello Dominik; Have a look at these documents for starters, you should find the information on the engineering tools you require: IO-Link System Manual V3.0 (Complete Edition) Hope this helps, Daniel Chartier |
8/8/2017 8:26 PM | |
Posts: 10 Rating:
|
But I have a problem because i connect by io_link master (balluff) and not by modul siemens |
8/8/2017 8:34 PM | |
Joined: 9/27/2006 Last visit: 3/14/2025 Posts: 12344 Rating:
|
Hello Dominik; Have you considered, possibly, that the best help could be provided by Baluff in your case? At least for the setup of exchanges between your Io-device and the IO-link master: The Siemens IO-Link documentation will explain the generalities of IO-link, not the details of configuration of a master from another manufacturer. Hope this helps, Daniel Chartier |
8/8/2017 8:58 PM | |
Posts: 10 Rating:
|
I have configuration io_link master but i want connect with my balluff led light by iol_device block and he show errors because i have bad configuration this block or i dont know What i have bad... ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 8/9/2017 8:02:54 AMNew subject after splitting |
|
9/8/2017 10:53 AM | |
Joined: 5/8/2017 Last visit: 6/4/2020 Posts: 25 Rating:
|
Can you upload a picture of your program? |
Follow us on