Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Iot2050 connection problem

Created by: AutoGen_7611670 at: 2/28/2023 5:55 AM (27 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2 | 3; |

28 Entries

Entries per page: 10 | 20 | all

3/2/2023 8:06 AM	Rate (0)
AutoGen_7611670 Member Joined: 3/24/2022 Last visit: 10/31/2024 Posts: 32 Rating: (0)	Hi, Yes. I saw and I checked. ssh folder is empty. When I write "iot2050setup" I get "command not found" message. Best regards

Suggestion To thank Quote Answer

3/3/2023 8:28 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Hi, sorry, you are using Industrial OS, not the Example Image. Did you enable the firewall during first-commissioning? If yes, you would need to add a rule to have the port 22 (ssh) open. You can use the command mel-setup -> Firewall Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

3/3/2023 8:51 AM	Rate (0)
AutoGen_7611670 Member Joined: 3/24/2022 Last visit: 10/31/2024 Posts: 32 Rating: (0)	Hi, This product has been used before. For this reason I don't know what they did. When the device came to me, I just installed an image on Micro SD card. I checked firewall as you said and ssh true ─────┤ Firewall Settings ├──────┐ │ Select Add to add to rules │ │ Select entry to edit selection │ │ Firewall Rule Selections │ │ Add Rule │ Done │ Node-RED - true │ OpenSSH - true │ SSH - true │ Telnet - true │ │ │ <Ok> <Cancel> Sorry, I ask a lot of questions, but I want to find out, what the problem is and use the product. best tegards │

Suggestion To thank Quote Answer

3/3/2023 9:12 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Hi, okay, the image on your SD card isn't considered probably, because the internal eMMc is set as first boot device. You can issue the command fw_printenv boot_targets to check the boot order. If you want to use your SD card, use fw_setenv boot_targets "mmc0 mmc1 usb0 usb1 usb2" to set SD card as first boot device. I can't really say, why you can't connect to this running image.. Seems that everything looks like it should work. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

3/3/2023 10:11 AM	Rate (0)
AutoGen_7611670 Member Joined: 3/24/2022 Last visit: 10/31/2024 Posts: 32 Rating: (0)	Hi , I wrote "fw_printenv boot_targets" but result no file root@localhost:~# fw_printenv boot_targets Cannot parse config file '/etc/fw_env.config': No such file or directory root@localhost:~#

Suggestion To thank Quote Answer

3/3/2023 12:27 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Ah V2.1.1.. Please unzip the attached file and copy file fw_env.config to /etc Best regards! Attachment fw_env.zip (349 Downloads)
	Last edited by: bergmanu at: 03/03/2023 12:29:41 Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

3/3/2023 12:56 PM	Rate (0)
AutoGen_7611670 Member Joined: 3/24/2022 Last visit: 10/31/2024 Posts: 32 Rating: (0)	Hi, Sorry, where is the etc file? Best regars

Suggestion To thank Quote Answer

3/3/2023 2:47 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Hi, there is no etc file. /etc is the path on the IOT2050 where you need to copy the fw_env.config file to. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

3/8/2023 7:29 AM	Rate (0)
AutoGen_7611670 Member Joined: 3/24/2022 Last visit: 10/31/2024 Posts: 32 Rating: (0)	Hi. Sorry, I did a search but couldn't find how to copy the fw_env.config file to etc in iot2050. Best Regards

Suggestion To thank Quote Answer

3/8/2023 8:24 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Hi, there is several way to copy files. The easiest way is to use the software WinSCP to do so. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 Communication

Follow us on