Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IoT2050 with extension IoT2000

Created by: AutoGen_6637137 at: 6/6/2023 12:50 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/6/2023 12:50 PM	Rate (0)
AutoGen_6637137 Joined: 6/6/2023 Last visit: 6/26/2023 Posts: 2 Rating: (0)	Hallo, ich habe mehrer Iot2050 mit der Erweiterungsplatine IoT2000 gekauft.nun habe ich die Betriebsanleitungen zum IoT2050, 2040 und dem ioT2000 gelesen. Leider sind die informationen nicht vollständig. Beim ioT2040 muss der Jumper X82 gesetz werden, daher gehe ich davon aus, das er beim IoT2050 auch gesetzt werden muss. Wie ist es mit dem Jumper X83? Ich habe as ioT2050 ohne Erweiterungsmodul IoT2000 getestet, das Mudlu wir leider sehr heiß. wie hoch muss die Wäremableitung des Schaltschrankes sein bzw. wieviel Wärmeleistung hat das IoT2050 mit Erweiterungsmodul? ich habe in der Betriebsanleitung einen weit von 6,5W gefunden, aber ist das der Maximalwert? ich suche einen möglichst kleinen unbelüfteten Metall-Schaltschrank von Rittal für Stehenden oder Liegenden Einbau. Kann mir da eventuell jemand etwas empfehlen? Grüße
	Last edited by: Jen_Moderator at: 06/07/2023 07:24:29 Headline translated.
Suggestion To thank Quote Answer

6/7/2023 7:25 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 12/7/2023 Posts: 7572 Rating: (156)	Hello AutoGen_6637137, Please try to discuss your question in English language. This is an international community, and we try to focus on one language. Posting in English will help you to get more response to your question. This is the translation of your question: AutoGen_6637137 Hello, I have bought several IoT2050 with the IoT2000 expansion board. I have now read the operating instructions for the IoT2050, 2040 and the ioT2000. Unfortunately the information is not complete. With the ioT2040, the jumper X82 must be set, so I assume that it must also be set with the IoT2050. How about the jumper X83? I tested the ioT2050 without the IoT2000 expansion module, the mudlu unfortunately gets very hot. how high does the heat dissipation of the control cabinet have to be or how much heat output does the IoT2050 have with the expansion module? I found far from 6.5W in the manual, but is that the maximum value? I'm looking for an unventilated metal switch cabinet from Rittal that is as small as possible for standing or lying installation. Can someone recommend me something? Greetings Regards, Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

6/14/2023 7:42 AM	Rate (0)
AutoGen_6637137 Joined: 6/6/2023 Last visit: 6/26/2023 Posts: 2 Rating: (0)	ok, sorry. but can anyone answer my questions? regards

Suggestion To thank Quote Answer

6/27/2023 11:34 AM	Rate (0)
apastore Regular Expert Joined: 10/22/2020 Last visit: 12/5/2023 Posts: 151 Rating: (5)	Hello, The X83 jumper is for setting the voltage level of the I/0's, which needs to be set according to any external hardware requirements. The rated case temperature of the IOT2050 is in the region of 70°C. Depending on the environment and orientation, the device may exceed this. So please be careful when handling it. Our suggestion is to use a metal case, as already mentioned. BR

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on