Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is a license required on the 1510SP for OPC UA Client only?

Created by: jpautomation at: 2/7/2023 12:13 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

2/7/2023 12:13 PM	Rate (0)
jpautomation Member Joined: 3/9/2017 Last visit: 10/30/2023 Posts: 5 Rating: (0)	Is a license required on the CPU (1510SP) for OPC UA Client only? - ie not using OPC UA Server on the PLC side ------------------------------------------------------------------------------------------ Split from OPC UA Licensing S7-1200/S7-1500.
	Last edited by: Jen_Moderator at: 02/08/2023 06:24:50 New subject after splitting
Suggestion To thank Quote Answer

2/7/2023 12:26 PM	Rate (1)
itafusna Silver Member Joined: 2/17/2020 Last visit: 12/1/2023 Posts: 911 Rating: (145)	Hi, For each CPU on which OPC UA is to be used (whether as a server or as a client) a separate OPC UA license is required. These are only Certificate of Licenses (paper licenses), not a license key. In TIA Portal, you must then select which license has been acquired.
	If this post helped you in any way, please rate it positively. Thank you.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users sancruz

2/7/2023 5:26 PM	Rate (0)
jpautomation Member Joined: 3/9/2017 Last visit: 10/30/2023 Posts: 5 Rating: (0)	Thanks. I see now when you create an OPC UA Client interface it shows in CPU>General>Runtime licenses which license is required.

Suggestion To thank Quote Answer

2/8/2023 8:34 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 12/4/2023 Posts: 3610 Rating: (526)	Hi, in the manual of TIA you find some more informations: License for OPC UA Regards, Towome
	If my post was useful, please rate me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on