Launch of sinumerik 840C

 What is meaning "The errors for it disappeared, but other ones appeared."

You need delete Axis from NC Machine Data--then disable drive machine Data

AutoGen_9835510

Hello. The battery died and I had to start everything from scratch. I loaded everything from HDD as it should be. There is one problem left. The file with engine settings contains unnecessary settings. There is no Q engine. I tried to delete it via the Drive MD -> Delete slot menu. The errors for it disappeared, but other ones appeared. Please tell me, maybe I am doing something wrong?

Foto:

Error drive Q:
https://postimg.su/image/EOl0i4p8/20241214_183605.jpg

Delete slot:

https://postimg.su/image/vVruaRzV/20241212_220932.jpg

Second error:

https://postimg.su/image/LUP6t7Nz/20241214_183826.jpg

 Yes after Accept conf+NCKPO and Accept all+NCKPO

try to set A22 passive then

Accept conf+NCKPO and Accept all+NCKPO again

AutoGen_9835510

I tried to remove the axis from the CNC machine data. How do I disable drive machine data, and do I need to do Accept conf+NCKPO and Accept all+NCKPO?

The errors for the Q engine have disappeared. But the error 300003 A22 configuration error bus configuration. 9169 F: Drive group: Faulty mains contact ? has appeared.

 Please show picture of NC MD 1st page

I told you you need making Q Axis "NO"

AutoGen_9835510

Thank you for your help. If I disconnect A22, the same error appears with the next engine A20. I will try to perform all the operations again. I actually deleted the A22 engine via Drive MD -> Delete slot. Or can it be disabled in another way?

 I did not see Q axis?

AutoGen_9835510