Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LB 326 Measuring Head, Help needed

Created by: Anjum786 at: 2/17/2013 5:24 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

2/17/2013 5:24 PM	Rate (0)
Anjum786 Posts: 21 Rating: (0)	Hi, What is the difference between LB 326 and AE LB 326 measuring head, kinly tell me if they are compatible with each other or not???
Anjum786 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

2/17/2013 5:45 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (474)	Anjum786 Hi, What is the difference between LB 326 and AE LB 326 measuring head, kinly tell me if they are compatible with each other or not??? Hello, Where you have fixed up this units ?? in cnc .... provide us the full type no of both the hardwares ??? Regards, Prakash
Ekalavya Posts: 2964 Rating: (474)
Suggestion To thank Quote Answer

2/17/2013 5:59 PM	Rate (0)
Anjum786 Posts: 21 Rating: (0)	Yes, we are using this head on cnc machine. LB 326 head was burnt and now we have AE LB 326 head in placement of LB 326 head. Kindly tell me if they are compatible with each other. and how i can check compatibility of these heads. i dont have manuals of AE LB 326 head.
Anjum786 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

2/17/2013 6:05 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (474)	Anjum786 Yes, we are using this head on cnc machine. LB 326 head was burnt and now we have AE LB 326 head in placement of LB 326 head. Kindly tell me if they are compatible with each other. and how i can check compatibility of these heads. i dont have manuals of AE LB 326 head. Hello, Whether this heads are from Siemens . there will be MLFB / type no. Provide this details... Regards, Prakash
Ekalavya Posts: 2964 Rating: (474)
Suggestion To thank Quote Answer

2/17/2013 6:05 PM	Rate (0)
Anjum786 Posts: 21 Rating: (0)	These are Heidenhain encoders
Anjum786 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

2/17/2013 6:31 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (474)	Anjum786 These are Heidenhain encoders Hello, sorry i don't have information.....Better try checking it in the http://www.heidenhain.de/de_EN/home/ i feel still the type nos what you said is not proper...pls check it again.... Regards, Prakash
Ekalavya Posts: 2964 Rating: (474)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on