Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Lock screen at runtime in flexible

Created by: sir miladoo at: 12/16/2021 9:53 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/16/2021 9:53 AM	Rate (0)
sir miladoo Member Joined: 2/12/2021 Last visit: 8/23/2024 Posts: 2 Rating: (0)	Phantom75 Is this a WinCC question or a WinCC Flexible question? Hi And how about WinCC Flexible ? hernan_e A simple but useful question How can I lock the screen size and position to prevent the user for changing it at runtime? thanks for any idea ------------------------------------------------------------------------------------------ Split from Lock screen at runtime.
	Last edited by: Jen_Moderator at: 12/16/2021 13:17:02 New subject after splitting. Inserted quote.
Suggestion To thank Quote Answer

1/5/2022 11:54 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/13/2024 Posts: 14165 Rating: (1774)	Hello sir miladoo what do you mean exactly? In WinCC flexible you can only choose the resolution of the Screens in the Project. This is a fixed setting. If you start the Runtime not in fullscreen mode then it will start on the primary monitor and you can move it also. If you start in fullscreen mode then it starts also on primary monitor. you cannot choose any other settings here. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on