Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO!230RCE with Proximity Sensor

Created by: nishu at: 4/4/2017 11:47 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/4/2017 11:47 AM	Rate (0)
nishu Posts: 66 Rating: (1)	Dear All, I want to connect Proximity Switch 2-wire 230VAC with LOGO!230RCE MLFB: 6ED10521FB000BA8. My problem is that Proximity not working when connected directly to Input of LOGO. Kindly confirm whether we connect proximity sensor directly to LOGO PLC, if yes than provide the solution. Regards NIshant
nishu Posts: 66 Rating: (1)
Suggestion To thank Quote Answer

4/4/2017 12:16 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating: (709)	nishu Dear All, I want to connect Proximity Switch 2-wire 230VAC with LOGO!230RCE MLFB: 6ED10521FB000BA8. My problem is that Proximity not working when connected directly to Input of LOGO. Kindly confirm whether we connect proximity sensor directly to LOGO PLC, if yes than provide the solution. Regards NIshant Hello, how you have connect the sensor? 1 wire in L1 and other in I1 ? or ?

Suggestion To thank Quote Answer

4/4/2017 12:26 PM	Rate (0)
nishu Posts: 66 Rating: (1)	1 wire in L1 and other wire in I1
nishu Posts: 66 Rating: (1)
Suggestion To thank Quote Answer

4/4/2017 12:34 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, Check the LOGO! Maunal. The sollution is published in the manual since many years! It is the similar problem with glow lamps.
Helmut_13 Posts: 2930 Rating: (432)	Last edited by: Helmut_13 at: 4/4/2017 12:36:33 PM
Suggestion To thank Quote Answer

7/1/2021 3:40 PM	Rate (0)
tigranes Regular Member Joined: 4/16/2021 Last visit: 6/6/2022 Posts: 26 Rating: (0)	search in this manual maybe you can find something Attachment Logo_e.pdf (455 Downloads)
	tigranes
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on