Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo 8 0BA0 remote output

Created by: totore69 at: 8/27/2020 5:17 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/27/2020 5:17 PM	Rate (0)
totore69 Posts: 3 Rating: (0)	Hello.I am newbe of siemens logo 8.i would like know if is possible activate an logo output from a remote pc only with a command line ex:192.168.1.10(logo 8)active1=on. I need it because is the only way to connect logo with video server . best regars
totore69 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/27/2020 5:24 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/19/2024 Posts: 34240 Rating: (4263)	No, only with a command a la yours not. Why do you not use the integrated web server?

Suggestion To thank Quote Answer

8/27/2020 5:30 PM	Rate (0)
totore69 Posts: 3 Rating: (0)	How my video server can enable the relays over web server?(sorry for my english )
totore69 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/27/2020 5:36 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/19/2024 Posts: 34240 Rating: (4263)	I don't know, because I don't know your video server. To use the web server, you need a browser like IE, Firefox, Google Chrome, Opera etc.

Suggestion To thank Quote Answer

8/27/2020 5:49 PM	Rate (0)
totore69 Posts: 3 Rating: (0)	Can i use a opc server to connect logo with my server
totore69 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/27/2020 6:49 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/19/2024 Posts: 34240 Rating: (4263)	Yes. Take a look at this Youtube video: https://www.youtube.com/watch?v=94b4fpez30s Or this web site: https://wiki.ibhsoftec.com/en/OPCServer:Variables_from_LOGO_8
	Last edited by: ixo65 at: 08/27/2020 18:53:32 Last edited by: Jen_Moderator at: 08/28/2020 09:02:30 Embedded video.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on