Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO and WINCC Basic V11 SP2

Created by: AustinFrank at: 6/14/2012 10:38 PM (14 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

6/21/2012 4:01 PM	Rate (0)
AustinFrank Posts: 13 Rating: (0)	Thanks to all. I am in. I have the I/O going, now working on alarm list.
AustinFrank Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

8/21/2012 1:27 AM	Rate (0)
AustinFrank Posts: 13 Rating: (0)	I am having problems with Basic V11 SP2 again. I have a program running on two laptops that work. B oth using the online simulation. When i try to run it on a desktop, it will not communicate. I have set the IP correctly. I can download programs. The test connection function works correctly. I take the same program running on one computer and put it on another with the key code installed and it will not simulate. It is communication based on the network light. When i look at the simulated screen, none of the values are viewed from the PLC, also when i try to send a value. I get the error, cannot transfer value to PLC. Thanks Frank
AustinFrank Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

8/21/2012 9:03 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	Hello Frank, I guess you can ping? Is the PG/PC interface set correctly? Best regards, Wizard

Suggestion To thank Quote Answer

8/21/2012 9:21 AM
fairy Posts: 1 Rating: (0)	Hi welcome to this forum site,it is very useful site to solve any type of quries but at the moment i am not able to give you any comment.i am sorry for that thanks. -------------- [url=http://www.ezdia.com/epad/2013-mercedes-benz-sl-class-price-reviews/7980/]AUTOMOBILES[/url]
fairy Posts: 1 Rating: (0)	Last edited by: fairy at: 8/22/2012 5:23 PM
Suggestion Quote Answer

8/21/2012 6:21 PM	Rate (0)
AustinFrank Posts: 13 Rating: (0)	My laptop shows the correct line to select. Go to Control Panel (PC) -> Set PG/PC interface and make sure it is "S7online -> TCP/IP (ethernet card you use)" When I try to do the same on the desktop in the lab, TCP/IP does not show up as an option for the installed card. I may try putting an older card in and see if it works.
AustinFrank Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on