Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo connection with W774-1 /W734-1

Created by: AMK13 at: 10/7/2019 6:15 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

10/7/2019 6:15 PM	Rate (0)
AMK13 Posts: 8 Rating: (0)	Hi All, Can we connect SCALANCE W774-1 /W734-1 with Siemens Logo devices ? We have mobile equipment on which we want to connect Logo which can then transmit data to SCALANCE W738-1. Many Thanks, Muneeb
AMK13 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/7/2019 6:19 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/11/2024 Posts: 34181 Rating: (4258)	Hello AMK13, at first welcome to the forum. At my knowledge yes. LOGO! works also with simply Switches.

Suggestion To thank Quote Answer

10/7/2019 6:26 PM	Rate (0)
AMK13 Posts: 8 Rating: (0)	ixo65 Hello AMK13, at first welcome to the forum. At my knowledge yes. LOGO! works also with simply Switches. Dear ixo65, Thanks for your reply, This leads to my next question. Is there a logo controller available which can connect wirelessly connect to SCALANCE W738-1. Without having to install SCALANCE W774-1 /W734-1 to my logo. Many Thanks, Muneeb
AMK13 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/7/2019 6:29 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/11/2024 Posts: 34181 Rating: (4258)	The LOGO! itself has no wireless communication. You must use a addional wireless device.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AMK13

|

Share this page:

Share this page on...

Follow us on