LOGO! in a corporate network

Hello,

 In a corporate network it's possible place a LOGO! 8 in a network and program it or see it from a PC in the office? The corporate network have IP address of the PC in the office such as:

IP address xx.xx.x.xxx Subnet Mask 255.255.252.0 Gateway xx.xx.x.x and how should I set in LOGO! ? I have tried something but not function

Thanks for the help

There has been a similar qustion, Try to read this post:

https://support.industry.siemens.com/tf/dk/en/posts/150222/

BR. Sven

Carfo

Hello,

 In a corporate network it's possible place a LOGO! 8 in a network and program it or see it from a PC in the office? The corporate network have IP address of the PC in the office such as:

IP address xx.xx.x.xxx Subnet Mask 255.255.252.0 Gateway xx.xx.x.x and how should I set in LOGO! ? I have tried something but not function

Thanks for the help

 Hello,

I did yesterday, I simply put the same network addresses in LOGO! and it works! e.g. with "x" the same numbers in the PC and LOGO!

PC : Address: xx.xx.3.19 Subnet mask: xxx.xxx.252.0 Gateway xx.xx.1.1

LOGO! : Address: xx.xx.1.192 Subnet mask: xxx.xxx.252.0 Gateway xx.xx.1.1