Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo serial cable driver

Created by: Shoaib Iqbal at: 12/24/2019 6:38 AM (17 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

12/24/2019 6:38 AM	Rate (0)
Shoaib Iqbal Posts: 15 Rating: (0)	Dear friends Hello, I want to know is it any drivers needed for logo PLC serial cable which connect directly with laptop RS232 Port.
Shoaib Iqbal Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

12/24/2019 7:06 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34238 Rating: (4262)	To my knowledge not. Or it is installed automatically with the software. There is only one special driver for the USB cable. Whether this should be installed is asked when installing LSC.

Suggestion To thank Quote Answer

12/24/2019 7:30 AM	Rate (0)
Shoaib Iqbal Posts: 15 Rating: (0)	Hi Friend, Thanks for your reply, Recently i install V7 logo software on win7 ultimate 64 bit but i am unable to communicate with my OBA6 plc. Whenever i try to communicate a pop up message come select new interface etc. Can you help me to find out this problem? And please help me how to put OBA6 in PC-Logo mode this plc do not have display. Currently i am using serial logo! cable to communicate with plc
Shoaib Iqbal Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

12/24/2019 7:40 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34238 Rating: (4262)	You must select the right Interface. Options > Interface In the Interface selection you must select the entry "LOGO! Cable" and then the right COM Interface (or click on Automatic Detection). Attachment Untitled.png (560 Downloads)

Suggestion To thank Quote Answer

12/24/2019 8:02 AM	Rate (0)
Shoaib Iqbal Posts: 15 Rating: (0)	I already select logo cable and related hardware but its not communicating.
Shoaib Iqbal Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

12/24/2019 8:22 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34238 Rating: (4262)	My PC has no physical COM interface. I have a old LOGO! 0BA5, a LOGO! RS232 cable und a converter USB to RS232. My LSC Version is V7.1.5 and I can use the LOGO! cable with the USB to RS232 converter without problem. See a attachment of a screenshot of the transfer of an program LOGO! to PC. Edit: Perhaps you have a problem with your COM interface? Attachment Untitled.png (391 Downloads)
	Last edited by: ixo65 at: 12/24/2019 08:24:58
Suggestion To thank Quote Answer

12/24/2019 8:49 AM	Rate (0)
Shoaib Iqbal Posts: 15 Rating: (0)	Dear friend, My laptop com port is working normal with other applications there was no problem in com port. Do you know the way how to check faulty logo! serial cable?
Shoaib Iqbal Posts: 15 Rating: (0)	Last edited by: Shoaib Iqbal at: 12/24/2019 08:51:55
Suggestion To thank Quote Answer

12/24/2019 8:52 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34238 Rating: (4262)	I'm sorry, but I can't help you with that. It is always difficult to diagnose remotely.

Suggestion To thank Quote Answer

12/24/2019 10:09 AM	Rate (0)
Shoaib Iqbal Posts: 15 Rating: (0)	OK my friend thanks a lot to give your time to me. God bless you.
Shoaib Iqbal Posts: 15 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

12/24/2019 10:13 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/18/2024 Posts: 34238 Rating: (4262)	You can now only test if you have the opportunity. Can you borrow a cablefrom somewhere else? Can you use another LOGO! to check the cable?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on