Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Logo Version 8.1 Frezzing

Created by: PCVA at: 9/1/2017 3:33 PM (7 Replies)

Rating (0)

Thanks 2

8 Entries

9/1/2017 3:33 PM	Rate (0)
PCVA Posts: 4 Rating: (0)	I have a site with 9 Logos 3 are Older Version 8.0 6 are Version 8.1 Periodically the 6 off that are Version 8.1 Freeze and just continue with what they were doing at the freeze point, I.e. Heating on Permanent. this is the second tine, the first after approx. 1 month of programming and the second after approx. 3 Months. None of the 3 off Version 8.0 do this one of them has the same programme as one of the Version 8.1
PCVA Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/1/2017 3:56 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/4/2024 Posts: 34135 Rating: (4254)	I only knows errors with the FS04, where the display "freeze"and reacts only by a restart. In your place I would reclaim the LOGO!s. In the meantime, there is a new FS05, where the error I described should not.

Suggestion To thank Quote Answer

9/1/2017 4:54 PM	Rate (0)
PCVA Posts: 4 Rating: (0)	yes its the Version FS4 and yes they only react to Power off then on again neverseen this befor with any version HOW on earth to I tell weather they are version 8 standard 8 FS5 or 8 FS5 all I know is the firs version on the side had 8.0 the ones that lock up / Freeze have V8.1 on the side ???
PCVA Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/1/2017 5:09 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/4/2024 Posts: 34135 Rating: (4254)	I'm sorry, english is not my mother tongue and therefore I do not understand everything you write, and the spelling mistakes. Due to various errors of the LOGO! 8. FS04 is a new LOGO! has been issued, the LOGO! 8.FS05. And the Service Pack 1 for LSC V8.1, since there are also errors in the software LSC V8.1. If you install Service Pack 1, then you have the LSC V8.1.1.

Suggestion To thank Quote Answer

9/1/2017 7:32 PM	Rate (0)
PCVA Posts: 4 Rating: (0)	do you think reprogramming the LOGO 8 FW04 with the new software V 8.1.1 will sort the Locking Up / Freezing Issue?
PCVA Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/1/2017 7:35 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/4/2024 Posts: 34135 Rating: (4254)	PCVA do you think reprogramming the LOGO 8 FW04 with the new software V 8.1.1 will sort the Locking Up / Freezing Issue? I think, no. Reclaim your LOGO!. Or start a Support Request...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PCVA

9/3/2017 8:35 AM	Rate (0)
PCVA Posts: 4 Rating: (0)	Thank you for the advice I will start a support request Thanks again
PCVA Posts: 4 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

10/7/2017 11:46 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/4/2024 Posts: 34135 Rating: (4254)	Hello PCVA, take a look of this topic: Product information on LOGO! 8 FS:04 and FS:05 to errors

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on