Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

lost the code( password). Mag 5000

Created by: Import-User-1 at: 1/8/2012 11:05 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/8/2012 11:05 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Import of a Technical Question of an User cflores Hi. I have a customer that told me that heforgot your password to change setting in mag 5000. Do you knowhow to recovery the password? if he forgot. Thanks a lot
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

2/10/2012 7:19 AM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Hi, If forgot the password, the user can't do recovery the password. Regards, Chook
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

2/10/2012 8:58 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello, Contact with nearest Siemens rep. or try it Support Request Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

4/30/2012 6:04 PM	Rate (0)
ChrisC@EastRegion... Member Joined: 1/17/2007 Last visit: 1/9/2023 Posts: 2 Rating: (0)	The "default" password is 1000, but if the customer has changed it to some other four digit number, then it can not be exposed for what that new number is, but they could reset the transmitter back to password = 1000. To reset it back, one would power-down the transmitter, then press and hold the TOP UP key (top-left button) and power back on while holding that button down past the software versions and the initail diagnostics. Once the transmitter is at the rate of flow screen, you would then let go of the button. Then press and hold the same button for two seconds until, "Password 0000" is displayed. You then should enter 1000 to gain access to the programming of the transmitter. ChrisC / Siemens Support 1-800-333-7421

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on