Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Matlab with Wincc

Created by: candyengineer at: 4/18/2008 8:30 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/18/2008 8:30 PM	Rate (0)
candyengineer Silver Member Joined: 5/17/2006 Last visit: 2/26/2024 Posts: 218 Rating: (26)	Dear Siemens forum Members, Is there anybody who had an experince with Wincc & S7 & Matlab communication ? Or do you have any idea ? All I want to do is to make some mathematical operations in matlab, signal operations, use wincc and S7300 plc. I found this page. http://www.mathworks.com/products/connections/product_main.html?prod_id=774&prod_name=PLC%20Link Thanks in advance Best regards. <<<<<<<<<<<<<<<<<<<<< Note : sorry from moderators if its wrong to give page link
	Genetic Fuzzy PID Controller
Suggestion To thank Quote Answer

4/19/2008 1:16 PM	Rate (0)
hami Posts: 4 Rating: (0)	hi. you can create an opc server in matlab and connect to it via opc client from wincc.
hami Posts: 4 Rating: (0)	Last edited by: hami at: 4/20/2008 12:20 PM
Suggestion To thank Quote Answer

4/23/2008 12:46 PM	Rate (0)
candyengineer Silver Member Joined: 5/17/2006 Last visit: 2/26/2024 Posts: 218 Rating: (26)	Dear SIEMENS forum members, Ive just found this useful link and I would like to share. http://www.industry.siemens.com/IT4Industry/EN/solution_services/SIMATIC_Addons/fuzzy_download.htm Best regards
	Genetic Fuzzy PID Controller
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on