Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Message The 'Tahoma' font is not installed. Check the install font

Created by: passport999 at: 1/6/2012 1:31 AM (26 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2 | 3; |

27 Entries

Entries per page: 10 | 20 | all

1/6/2012 1:31 AM	Rate (0)
passport999 Posts: 2 Rating: (0)	Iam usingS71214,KTP600colors,S7Basic11sp2, Win7,designed ondesktoppcis notproblem, copytolaptop thefaulty:The 'Tahoma' font is not installed. Check the install font,laptopanddesktopalikeallsoftware pleasehelp !!! Attachment Message .jpg (910 Downloads)
passport999 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/6/2012 10:11 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/11/2024 Posts: 4351 Rating: (1452)	Hi, If I right understood you 1 - Have a HMI project that compile OK in a PC. 2 - The same project gives a error message when runs in a Notebook. Am I right? Sugestions: 1 - Click with right mouse on the HMI (Project tree) -> compile -> rebuild all 2 - Run the installation (or SP if the case) DVD and repair the instalation. After that try the suggestion 1. Informe us also how is the operationa sistem (windows) that you use. Please, inform us if some fault message comes.
	Last edited by: Pegaia at: 1/6/2012 10:13 AM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

1/7/2012 2:44 AM	Rate (0)
passport999 Posts: 2 Rating: (0)	Youhaveto understandthe problemcorrectly. Followstep1inlaptop -->butstillerrors on Ihave reinstalledwindows732bit,installStep7BasicV11,andV11Update1SP2-butstillthe error Now PC&laptopdoes not have anysoftwareother thanWindowsandStep7 LaptopandPCinstalledwindowsfromaDVD,aDVDStep7,and upgradewitha package ofSP2,and notupdatewindows. I'm surethe samelaptopandPCoperating systemsandsoftwareforsiemens the only difference isthe hardware andscreenresolution, I installedthe sameresolution Results:PCcompileOK,laptopdoes not youpleasehelp,my workwasout of time
passport999 Posts: 2 Rating: (0)	Last edited by: passport999 at: 1/7/2012 2:47 AM
Suggestion To thank Quote Answer

1/9/2012 4:10 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Can you see the fond "Tahoma" under Windows --> Fonds? Then you must install the fond "Tahoma". Is this behaviourby another projects too? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

9/25/2012 12:43 AM	Rate (0)
fandosj Posts: 10 Rating: (0)	I have the same error, try to install again the software to try to fix it
fandosj Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

9/25/2012 9:02 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (173)	Tweety Hello, Can you see the fond "Tahoma" under Windows --> Fonds? Then you must install the fond "Tahoma". Is this behaviourby another projects too? Tweety That's the way it should work. Check the 'Fonts' folder in windows to see whether the Tahoma is available. There should be 3 times Tahoma, as far as I remember. Tahoma bold, normal and a third one. Just compare with the fonts from the other PC.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

9/25/2012 7:27 PM	Rate (0)
fandosj Posts: 10 Rating: (0)	I can see the font in the windows folder, and the error appear in new projects and in old project in this laptop, in other computers do no appear this error, I tried to install Tia Portal again and the error still is on, in other forums i noticed that this error appears with other programs, may be that installing microsoft office some fonts change, an they suggest to eliminate all the fonts and install again from windows i still have not tried this, if you do not give me any suggestions i´ll install windows again to see what happens, thankyou very much for your post.
fandosj Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

9/26/2012 9:42 AM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (173)	Delete the fonts from the 'fonts' folder and copy the files from the other (working) PC to your laptop. Then recheck the issue.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

9/26/2012 8:59 PM	Rate (0)
fandosj Posts: 10 Rating: (0)	Yes you can. Thanks a lot.
fandosj Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

4/24/2014 1:27 PM	Rate (0)
Alexandr B. Posts: 7 Rating: (0)	Good day! I have a problem too. Laptop, Win7 prof 32 bit, TIA portal v12. When i try to compile project, compiling aborting and writing the message: ",The 'Courier New' font is not installed. Check the installed fonts." I can't nothin to do with it... I installed new fonts on windows7, wrote new reg file "standart_fonts_win_7.reg", changed different settings... and nothing. All the same TIA portal doesn't want find the fonts. Anybody know, what need to do, that liquidate this trouble?! Please help, if not difficult. Attachment img.jpg (785 Downloads)
Alexandr B. Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on