Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

migrate from op 77b to kp 400 using wincc professional v11

Created by: jkt_2 at: 6/17/2014 11:49 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

6/17/2014 11:49 AM	Rate (0)
jkt_2 Experienced Member Joined: 10/23/2012 Last visit: 9/24/2024 Posts: 39 Rating: (0)	hey jens_app, even tough i am also facing same problem. which version your using.. can you eleborate briefly....
	Last edited by: CS Moderator at: 6/22/2014 3:29 PM new subject after splitting from /tf/WW/en/Posts/110133#top
Suggestion To thank

6/17/2014 12:06 PM	Rate (0)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	jkt_2 hey jens_app, even tough i am also facing same problem. which version your using.. can you eleborate briefly.... Hello jkt_2, I'm using tia portal v11 sp2 upd5. I'm not sure what's causing your problems, have you tried anew project and just create a hmi tag linked to your VW and use linear scaling? Did that work? Maybe something went wrong during migration? Just fishing here... maybe the experts can help better. Kind regards, Jens
	Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank

6/18/2014 7:50 PM	Rate (0)
jkt_2 Experienced Member Joined: 10/23/2012 Last visit: 9/24/2024 Posts: 39 Rating: (0)	hey jens_app, i migrate the project from op 77b to kp 400 by using wincc professional v11. everything is fine but except one error message.ie,, The string of the address for the Device_1\PT_Alarm Messages 1 tag has changed from MW 13 to M 13.0.,6/18/2014,11:09:16 PM i do not know why ...? will you help me out please..

Suggestion To thank

6/18/2014 8:31 PM	Rate (0)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 11/29/2024 Posts: 815 Rating: (123)	jkt_2 hey jens_app, i migrate the project from op 77b to kp 400 by using wincc professional v11. everything is fine but except one error message.ie,, The string of the address for the Device_1\PT_Alarm Messages 1 tag has changed from MW 13 to M 13.0.,6/18/2014,11:09:16 PM i do not know why ...? will you help me out please.. Dear jkt_2, since this is a new question I'd advice you to create a new thread, this way others can also contribute and you are not bound to only my suggestions. Concerning your issue; I have limited experience with migrating projects and the errors that occur during and after. Please start a new thread and ask the more experienced users. Sorry I couldn't be of more help, my apologies. Kind regards, Jens
	Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank
This contribution was helpful to 1 thankful Users Josh Elliott

6/22/2014 3:37 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/19/2024 Posts: 4114 Rating: (195)	closed cause question published twice. The second thread with the subject migration erroris published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on