10/31/2011 10:48 AM | |
Posts: 2 Rating: (0) |
Have you used quick commissioning Check P3900 |
4/10/2012 4:22 AM | |
Posts: 3 Rating: (0) |
you can check P927 , it = 0011 > OK |
5/1/2012 1:51 AM | |
Joined: 6/4/2008 Last visit: 5/10/2024 Posts: 1484 Rating: (322)
|
Hi, can you give us the parameter values for: P0003 = ? P0010 = ? P3900 = ? P0927 = ? Regards, Graeme
|
7/8/2013 11:15 AM | |
Posts: 3 Rating: (0) |
Sir,what is the solution of factory reset p0010=2 not reset. |
7/8/2013 1:00 PM | |
Joined: 5/28/2008 Last visit: 5/11/2024 Posts: 4506 Rating: (836)
|
Hello, Please openMarcjan'sattached picture in this thread (5th post). [IMG]/tf/WW/en/postattachments/download?attachmentId=23578[/IMG] Hope this helps.
|
Last edited by: Ayman Elotaify at: 7/8/2013 1:30 PMAyman Elotaify |
|
7/25/2013 2:27 PM | |
Joined: 4/28/2013 Last visit: 5/14/2024 Posts: 10 Rating: (0) |
Dear sir you have to check if P0011 value equal to P0013 value Regards
|
9/24/2013 12:11 PM | |
Posts: 1 Rating: (0) |
My inverter not setting too, P0010=2, P3900=0, r0200=P0201=0, r0203=0, P0970=0. Can you help me, please? |
9/24/2013 4:19 PM | |
Joined: 1/21/2013 Last visit: 3/19/2024 Posts: 4618 Rating: (705) |
Hi you have tried says Marcjan? factory-reset.JPG |
Follow us on