Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MP 277 Program transfer from PC

Created by: GAS2 at: 3/26/2009 1:07 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/26/2009 1:07 PM	Rate (0)
GAS2 Posts: 66 Rating: (0)	Hi All, I am using MP277 & S7 416. I am trying to download MP277 program made in Winflex2007 from PC through Ethernet port. But it shows Error "Could not establish connection". Iset IP address for PC & MP277. I chekedcommunication by pinging- Ping MP277 from PC- Gotreply from device Ping PC from MP277 - No Reply, Shows error code 11011 Is there any another method to download program? Please send the settings & cable details. Please help me.
GAS2 Posts: 66 Rating: (0)
Suggestion To thank Quote Answer

3/26/2009 1:16 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, Go to MP277 control panel then double click on "transfer" then make sure that channel 2 set as Ethernet and both checkboxes checked "Enable channel" and "Remote Control". Then go to network and make sure that both PC and MP uses the same subnet address. Other posibilities is to use MPI, DP or serial, but Ethernet should work with no problems.
	Best regards, Darius
Suggestion To thank Quote Answer

3/26/2009 1:34 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/6/2024 Posts: 8735 Rating: (1167)	Dear GAS2, Please have a look at this link: http://support.automation.siemens.com/WW/view/en/23800567 (The panel should have a another name!) Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on