MP377 reset factory

7/21/2013 7:16 AM	Rate (0)
saharmalmir Posts: 22 Rating: (0)	Hi I have a problem with MP377. this paneldoes not load it's opearting system when It is turned on.I'm working with PROsave software but there is not " reset factory" option in PROSave when I connect the panel to the PC. what is the reason? Thanks

Suggestion To thank Quote Answer

Posts: 22

Rating:

(0)

Hi
I have a problem with MP377. this paneldoes not load it's opearting system when It is turned on.I'm working with PROsave software but there is not " reset factory" option in PROSave when I connect the panel to the PC.
what is the reason?
Thanks

7/21/2013 8:13 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	saharmalmir Hi I have a problem with MP377. this paneldoes not load it's opearting system when It is turned on.I'm working with PROsave software but there is not " reset factory" option in PROSave when I connect the panel to the PC. what is the reason? Thanks Prosave can perform factory reset for SIMATIC Panels using OS update menu. What do you meant by the panel do not load its operating system? It should come from Siemens with operating system. And if not, you have to send it back to Siemens. Updating OS do not means that you can install OS to the SIMATIC Panel (Windows CE Panels). In the following FAQ, a detailed instructions for resetting the MP377 to factory setting. What settings do you have to make on an MP 377 to reset the operator panel to the factory settings? Hope this helps.
Ayman Elotaify
Suggestion To thank Quote Answer

7/21/2013 8:13 AM

Rate (0)

Ayman Elotaify

Platinum Member

Joined: 5/28/2008

Last visit: 11/6/2024

Posts: 4516

Rating:

(839)

saharmalmir
Hi
I have a problem with MP377. this paneldoes not load it's opearting system when It is turned on.I'm working with PROsave software but there is not " reset factory" option in PROSave when I connect the panel to the PC.
what is the reason?
Thanks

Prosave can perform factory reset for SIMATIC Panels using OS update menu.
What do you meant by the panel do not load its operating system? It should come from Siemens with operating system. And if not, you have to send it back to Siemens.
Updating OS do not means that you can install OS to the SIMATIC Panel (Windows CE Panels).
In the following FAQ, a detailed instructions for resetting the MP377 to factory setting.
What settings do you have to make on an MP 377 to reset the operator panel to the factory settings?

Hope this helps.

Ayman Elotaify

7/21/2013 8:38 AM	Rate (0)
saharmalmir Posts: 22 Rating: (0)	when you turn on a panel, It load It's OS by usual and show Loader inculing transfer,start,control panel.... but in this case It shows nothing. I tried to use Ethernet for connection but I dont know It's default IP address. Doyou know It's IP address?

Suggestion To thank Quote Answer

7/21/2013 8:38 AM

Rate (0)

saharmalmir

Posts: 22

Rating:

(0)

when you turn on a panel, It load It's OS by usual and show Loader inculing transfer,start,control panel.... but in this case It shows nothing. I tried to use Ethernet for connection but I dont know It's default IP address. Doyou know It's IP address?

7/21/2013 10:08 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	saharmalmir when you turn on a panel, It load It's OS by usual and show Loader inculing transfer,start,control panel.... but in this case It shows nothing. I tried to use Ethernet for connection but I dont know It's default IP address. Doyou know It's IP address? Hello saharmalmir, Please follow the instructions in the follwoing FAQ to download the project using ethernet. How can you transfer a WinCC flexible project via Ethernet to a Windows-based panel? Hope this helps.
Ayman Elotaify
Suggestion To thank Quote Answer

7/21/2013 10:08 PM

Rate (0)

Ayman Elotaify

Platinum Member

Joined: 5/28/2008

Last visit: 11/6/2024

Posts: 4516

Rating:

(839)

saharmalmir
when you turn on a panel, It load It's OS by usual and show Loader inculing transfer,start,control panel.... but in this case It shows nothing. I tried to use Ethernet for connection but I dont know It's default IP address. Doyou know It's IP address?

Hello saharmalmir,

Please follow the instructions in the follwoing FAQ to download the project using ethernet.

How can you transfer a WinCC flexible project via Ethernet to a Windows-based panel?

Hope this helps.

Ayman Elotaify

Created by: saharmalmir at: 7/21/2013 7:16 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

saharmalmir

Ayman Elotaify

saharmalmir

Ayman Elotaify

4 Entries

Follow us on

Created by: saharmalmir at: 7/21/2013 7:16 AM (3 Replies)

Rating (0) Thanks 0

4 Entries

4 Entries

All about SIMATIC Panel

Follow us on

Rating (0)

Thanks 0