Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

NC keyboard"Input" fault sometimes?

Created by: Tom_Li at: 6/25/2008 3:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/25/2008 3:44 PM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear Sir, We have one problem is that when we use the "INPUT"key to edit programme in the editor, when we select one programme and push "input", then the editor open, immidiately there are many "enters". But sometimes we use it when open the program editor. Is there any relationship about the HMI or just the OP fault?
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank Quote Answer

6/30/2008 9:38 AM	Rate (0)
SteveJ Posts: 328 Rating: (29)	Dear Sir It sounds very much to me like you have a faulty keyboard. Does the fault still occur if you use an external keyboard? Regards SteveJ
SteveJ Posts: 328 Rating: (29)
Suggestion To thank Quote Answer

7/14/2008 10:26 AM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear Mr.SteveJ, Thank you for your replay. It's ok when I use the external keyborad.So I consider the keyboard is fault.
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on