Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

network configuration in pcs7 v7.0

Created by: ushu at: 2/13/2008 5:40 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/13/2008 5:40 AM	Rate (0)
ushu Experienced Member Joined: 7/18/2006 Last visit: 12/7/2024 Posts: 28 Rating: (0)	In pcs7 V7.0 environment is it advisable to mix Ethernet plant bus with terminal bus? My second question is if I am using two servers one main and other stand by with one engg.station and using 417-4H AS stations over cp1613 IE residing at each station(2 no. each). then kindly tell me what is the exact role of REDCONNECT? how to order it? what is the difference between scalance and OSM? Thank you

Suggestion To thank Quote Answer

2/13/2008 1:13 PM	Rate (0)
Mario Braganca Posts: 124 Rating: (17)	1. It's possible but I dont recommend to mix the networks. 2. Each S7-Redconnect communicates up to four CP 1613 A2to Industrial Ethernet with ISO protocol with no additional programming overhead for the PC and in H systems See the description and MLFB here https://mall.automation.siemens.com/WW/guest/index.asp?aktprim=0&nodeID=9300173&lang=en&foldersopen=-4427-4417-4372-4363-4362-1-4435-&jumpto=4435 3. OSM is Optical Switch Module. Scalance is a new family of Industrial Switches. See here Industrial Ethernet switches
Mario Braganca Posts: 124 Rating: (17)	Last edited by: Mario Bragança at: 13.02.2008 13:19
Suggestion To thank Quote Answer

2/14/2008 9:01 AM	Rate (0)
ushu Experienced Member Joined: 7/18/2006 Last visit: 12/7/2024 Posts: 28 Rating: (0)	Thank you very much for information.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on