Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP7 Migration

Created by: syd_b at: 11/11/2013 6:06 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/11/2013 6:06 PM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 4/11/2023 Posts: 341 Rating: (10)	Hi, I have an OP7 and I want to change. I have the Protool program, I know that OP77B was the substitute, but it´s in discontinuation phase so it would be the same in some years later. The issue is what panel can I choose to change the OP7 and OP77B ? Thanks.

Suggestion To thank Quote Answer

11/12/2013 8:28 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 4/21/2023 Posts: 4617 Rating: (700)	Hi syd_b, Take a look KP 400: SIMATIC HMI Comfort Panels - Device overview - Operator devices ... and if you want to move from OP7 (Protool) to KP 400 (TIA Portal) I think it is not possible directly, take a look to our experts: Tags from Protool project to TIA
	Last edited by: Ste39 at: 11/12/2013 9:13 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on