Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OPC server for different PLCs

Created by: Mehrnoosh at: 12/14/2005 12:57 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/14/2005 12:57 PM	Rate (0)
Mehrnoosh Posts: 102 Rating: (9)	Hi I want to read data from different types of PLC into a WinCC project,using OPC. Do you know any suitable OPC for this PLCs: Mitsubishi model MELSEC_ASI OMRON model C200HS OMRON model C500 AEG-Telefunken model logistat CP_80 Toshiba EX_40Plus Thank Mehrnoosh
Mehrnoosh Posts: 102 Rating: (9)
Suggestion To thank Quote Answer

12/16/2005 9:10 PM	Rate (0)
TICMASI Posts: 13 Rating: (0)	hello . the are so many type of server for opc i am work wiht this http://www.toolboxopc.com/ They have opc server for any device in this word if they don,t they make . best regards and happy merry chrismast. ticmasi
TICMASI Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

12/18/2005 6:58 AM	Rate (0)
Mehrnoosh Posts: 102 Rating: (9)	Hi Ticmasi[:)] Thanks a lot for your help. Mehrnoosh
Mehrnoosh Posts: 102 Rating: (9)
Suggestion To thank Quote Answer

12/19/2005 11:20 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	[quote user="Pegaia"] OPC is an open standard to data exchange between software’s. So, I suggest you contact the PLC fabricants to obtain information’s about drivers that works with this standard (and PLC’s). Denilson Pegaia Siemens Mercosur / Brasil Automation and Control Division - Technical Support & Hotline - E-Mail: atencao.cliente.ac@siemens.com.br
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on