Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

open file .hmi without file log.ldf

Created by: robertodg at: 1/3/2007 11:29 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

1/3/2007 11:29 PM	Rate (0)
robertodg Posts: 2 Rating: (0)	hello, my problems is open old file .hmi without file log.ldf. i used the realease Winccflexible 2005 Sp1 HF4. version 2005 the plans single with the rows could be opened hmi, without the high ones. how I can resolve the problem? thanks Roberto my mail: robertodg@inwind.it
robertodg Posts: 2 Rating: (0)	Last edited by: robertodg at: 1/3/2007 11:29 PM
Suggestion To thank Quote Answer

1/4/2007 10:40 AM	Rate (1)
ZAK Gold Member Joined: 5/8/2006 Last visit: 4/29/2024 Posts: 1085 Rating: (77)	Hi, you need the hmi and ldf file for all WinCC flexbile versions. More information about the project archiving with WinCC flexible: http://support.automation.siemens.com/WW/view/en/21896449 Bye

Suggestion To thank Quote Answer

1/5/2007 9:15 PM	Rate (0)
robertodg Posts: 2 Rating: (0)	thank you zak, but my problem is that I do not have the file log.ldf and i do not know like recovering it.
robertodg Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/8/2007 11:56 AM	Rate (0)
skimmer Bronze Member Joined: 9/5/2007 Last visit: 3/7/2023 Posts: 317 Rating: (18)	You should be able to open the project just from the .hmi file. The .ldf file is a log file created by the compiler when you open the HMI project. If yu can't open the .hmi file then I suggest it must be corrupt [:(]

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on