Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Opening a project on other PC

Created by: Jmoos at: 6/7/2010 10:01 AM (6 Replies)

Rating (3)

Thanks 3

7 Entries

6/7/2010 10:01 AM	Rate (0)
Jmoos Posts: 4 Rating: (2)	Hello, when i try to open a saved project on an other pc, the screens on my hmi only display "text" For example: a button was displaying "back" now it shows "text" who can help me out? Moos Attachment text.JPG (586 Downloads)
Jmoos Posts: 4 Rating: (2)
Suggestion To thank Quote Answer

6/7/2010 10:18 AM	Rate (1)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (172)	Hi. Check the language settings of your engineering system (TIA Portal) and the one the project was created. There is some kind of problem if a project is edited on two different systems with different language settings of the software.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

6/7/2010 10:34 AM	Rate (0)
Jmoos Posts: 4 Rating: (2)	Hello, The language settings under options--> settings -->general are on both machines "english USA" Moos
Jmoos Posts: 4 Rating: (2)
Suggestion To thank Quote Answer

6/7/2010 3:09 PM	Rate (0)
automatizzando Bronze Member Joined: 3/11/2007 Last visit: 7/18/2024 Posts: 226 Rating: (13)	I have the same problem

Suggestion To thank Quote Answer

6/7/2010 3:38 PM	Rate (1)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (172)	Check the editing language, too. You can find it in "Languages & Ressources" > "Project Languages"
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

6/7/2010 8:55 PM	Rate (1)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 9/11/2024 Posts: 4347 Rating: (1444)	Hi, take a look also in the FAQ http://support.automation.siemens.com/BR/view/en/37950269
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/8/2010 9:04 AM	Rate (0)
Jmoos Posts: 4 Rating: (2)	Thanks On one PC the project language was English (great britain) the other English (USA). Everything is fine now. Jmoos
Jmoos Posts: 4 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users TomDeWou zzVss

|

Share this page:

Share this page on...

Follow us on