Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

P1545

Created by: hamid rad at: 10/18/2014 11:57 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/18/2014 11:57 AM	Rate (0)
hamid rad Posts: 41 Rating: (8)	hi there could you please help me about parameter no.1545. whats that exactly? and whats the relation beetwen P1545 and fault no. 07900 "motor stalled"? thanks a lot
hamid rad Posts: 41 Rating: (8)
Suggestion To thank Quote Answer

10/18/2014 11:05 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (67)	see function diagramm 8012. You can change p2175 / p2177 too.

Suggestion To thank Quote Answer

10/20/2014 8:04 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, p1545 is for the activation for travelling to fixed stop, that means that the drive sooner or later reaches a blockade which could not be moved, so that the drive will brake down to zero speed and go to its torque limits. If p1545 = 0 and the drive reaches its torque limits and remains there for a specific time (longer than p2177) then the motor blocked fault F7900 is triggered. In order to avoid this fault if p1545 = 1 then F7900 is masked and won't occur.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

10/25/2015 10:42 PM	Rate (0)
mourad76 Bronze Member Joined: 10/23/2014 Last visit: 10/30/2024 Posts: 201 Rating: (0)	will the drive stop normally without fault after you put p1545=1 although zero speed and torque limit reached ?
	Last edited by: mourad76 at: 10/25/2015 10:48:54 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on