Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC Adapter usb on Windows 7

Created by: Joseallan at: 12/8/2012 3:39 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/8/2012 3:39 AM	Rate (0)
Joseallan Member Joined: 8/24/2012 Last visit: 12/28/2022 Posts: 3 Rating: (0)	Dear Sirs, How could i connect PC adapter USB (6es7 972-0bc20-0xa0) to S7-400 on Windows7 Than you

Suggestion To thank Quote Answer

12/8/2012 3:03 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Just connect the adapter, select it in PG/PC Interface and that's it. Perhaps you receive an error and for that reason asking us? best regards, Hristo Mihalev

Suggestion To thank Quote Answer

12/10/2012 3:04 AM	Rate (0)
Joseallan Member Joined: 8/24/2012 Last visit: 12/28/2022 Posts: 3 Rating: (0)	Dear Sir, I already set PC/PG interface to PC adapter MPI and PC adapter Auto and still Error.(Online: Communication link to the adapter damage. I install the driver from CD and the installation was interupterd. (Message: the wizard was interupted before the PC adapter USB could be completely installed). Seting to TCPIP on PC/PG interface usign LAN cable is good. Is there any Driver for thisAdapter? Im using Step7 5.5 + SP1 on Windows 7 Pro. Thank you, Jose Allan

Suggestion To thank Quote Answer

12/10/2012 8:58 AM	Rate (0)
Joseallan Member Joined: 8/24/2012 Last visit: 12/28/2022 Posts: 3 Rating: (0)	Problem solve connecting the adapter to usb 3.0 windows 7 will not recognize connecting to usb 2.0 everything is good

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on