Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCS 7 faceplates problem

Created by: alienbob at: 9/10/2012 2:23 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/10/2012 2:23 PM	Rate (0)
alienbob Posts: 27 Rating: (0)	Hi everybody. My situation is as follows: - 1 OS redundant server - 1 engineering - 2 PLC'2 417-H - Win 7 Ultimate on engineering - Win Server 2008 on servers - PCS 7 V 8.0 The problem: I've connected the redundant server on both PLC's, and I am using a graphic library derived from the standard APV 8. I have all communication ok, I've created 2 test pages, one for each PLC. On one page everything is perfect. On the other page, all faceplates seems connected to the wrong device. The strange part is that, for example, I can operate one motor(start/stop), but all comments and interlock/permissive/protection on his faceplates seems to be connected to a totally diferent device. I've checked in offline the page, but all blockicons are pointing to the correct device, but in runtime is a mess. So in short, block incons seems ok, faceplates crazy. But i repeat, the same library, on the other page, work just fine. Also, on local OS on engineering, everything is fine. Any ideeas? I've attached a printscreen, where I marked in read the wrong values. Sorry for my lack of drawing skills:). Thank you. Attachment 1.jpg (41 Downloads)
alienbob Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

9/10/2012 4:09 PM	Rate (0)
TerminalBuzz Silver Member Joined: 11/4/2011 Last visit: 5/22/2023 Posts: 253 Rating: (50)	Any information from APDiag Output Window? ^{C:\Program Files\SIEMENS\WINCC\uTools\apdiag.exe}

Suggestion To thank Quote Answer

9/11/2012 12:31 PM	Rate (0)
alienbob Posts: 27 Rating: (0)	Solved it by recreating the OS servers...it seems that, as I work in a multiproject, it found 2 variables with the same name in different projects, and everything went crazy. Anyway, this should not be allowed...at least not without a warning or something. Thank you.
alienbob Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on