Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCS7 V7SP1, Client overview area button link error

Created by: fcakmak2004 at: 4/3/2008 10:29 PM (21 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

22 Entries

Entries per page: 10 | 20 | all

4/8/2008 2:21 PM	Rate (0)
Dorftrottel? Silver Member Joined: 8/10/2006 Last visit: 8/13/2024 Posts: 298 Rating: (29)	If you haven't migrated your project from WinCC, go ahead and do it. (I migrated my existing V7.0.1 OS Project).

Suggestion To thank Quote Answer

4/8/2008 7:01 PM	Rate (0)
Dorftrottel? Silver Member Joined: 8/10/2006 Last visit: 8/13/2024 Posts: 298 Rating: (29)	Had the same problem today. Solved it by opening project in WinCC Explorer on ES, opening OS Project Editor, and then checking OK. It then regenerates the OS screens from the base_data_pool. All of the navigation buttons showed up then.

Suggestion To thank Quote Answer

4/8/2008 8:51 PM	Rate (0)
fcakmak2004 Bronze Member Joined: 3/15/2006 Last visit: 11/3/2024 Posts: 18 Rating: (0)	I can't solve problem. Where is the base_data_pool. I don' t found.

Suggestion To thank Quote Answer

4/8/2008 9:36 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	fcakmak2004: What Jim means by base data pool is the base library where the standard pictures are stored. Every time you create a new WinCC project or when you run the OS Project editor, standard pictures are copied from this library to your project. For solving your problem, please follow the steps below and let us know the results: Step 1 - Migrate your WinCC Client project Step 2 - Run OS Project editor. Make sure the settings are as shown in my attachment. Regards, Phantom Attachment Dokument1.pdf (304 Downloads)
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/9/2008 7:27 PM	Rate (0)
fcakmak2004 Bronze Member Joined: 3/15/2006 Last visit: 11/3/2024 Posts: 18 Rating: (0)	I can see overwiev area butons on the client. But Ican NOTworking area buton link. When I click overwiev buton,it doesn't open process image area (process picture). The Server is OK(done). Iam trying every e-mail. The client is not OK. Despite everything, I thanks everybody...

Suggestion To thank Quote Answer

4/9/2008 9:10 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Perhaps I have entirely misunderstood your problem. In your latest post, what you are saying is, on the client you can see the "overview buttons" on top and can jump to various screens from there, but you cannot access the screens from the key Picture selection by name located in the keyset at the bottom of the screen?
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/10/2008 8:26 AM	Rate (0)
fcakmak2004 Bronze Member Joined: 3/15/2006 Last visit: 11/3/2024 Posts: 18 Rating: (0)	I can see the "overview buttons" on top and can't jump to various screens from there on the client.

Suggestion To thank Quote Answer

4/10/2008 5:47 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Since you can see the "buttons" in the overview, the server is online. If server is not online the buttons will show grayed out <server down>. The screens are fetched from the server when you click on these buttons. In the WinCC explorer, verify that the path is shown correctly in the server data. Also, verify the status of the server connections. At this point I cannot think ofsomething else. My recommendation is you should log in a support request with Siemens tech support. Somebody needs to take a look at your project. BTW, have you tried creating a brand new client? All the best.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/6/2009 6:27 PM	Rate (0)
bocatadeatun Bronze Member Joined: 10/18/2006 Last visit: 7/29/2024 Posts: 163 Rating: (3)	Hello there ! i´m facing exactly the same problem. How did u finally solve it? We´ve tried almost everything. Besides, we´ve got a pair of redundant servers and they´re continuously archiving sowe´d like to perform changes that don´t affect this archived values Thanks a lot in advance for your tips. Ciao!

Suggestion To thank Quote Answer

4/7/2009 10:20 AM	Rate (0)
bocatadeatun Bronze Member Joined: 10/18/2006 Last visit: 7/29/2024 Posts: 163 Rating: (3)	Sorry, i forgot to say that in my case the project doesn´t come from a Migrated version. It´s a clean v7.0 SP1 installation. Thanks for all the posts.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on