Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PID not responding 1214 FW2.2 / V11 SP2 upd2

Created by: koenb at: 4/5/2012 1:58 PM (13 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

5/22/2012 8:18 AM	Rate (0)
koenb Silver Member Joined: 6/26/2009 Last visit: 3/30/2023 Posts: 122 Rating: (23)	Latest news from my local support team : The guys in Germany were able to reproduce the problem. They have send the problem to the development team. Meantime we wait patiently...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Gabriel de Oliveira

5/22/2012 1:02 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 5/22/2023 Posts: 229 Rating: (26)	Hello, Please, post the feedback here when you get it. Regards
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

5/25/2012 5:46 PM	Rate (0)
Vippi Experienced Member Joined: 9/24/2008 Last visit: 4/27/2023 Posts: 106 Rating: (4)	Hi everybody, I'm esperiencing exactly the same item. It is a flow control and "enable last mode" is already checked. I need the system to restart automatically after a every stop, but I always find it with state variable = 0 and only way to make pid restart is connecting online with commissioning editor

Suggestion To thank Quote Answer

5/25/2012 6:27 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 5/22/2023 Posts: 229 Rating: (26)	Hello, There are some open threads about it. /tf/WW/en/Posts/61273 /tf/WW/en/Posts/33957#top Regards
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on