Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Plasma cutting Macheen

Created by: Essam at: 1/25/2013 10:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/25/2013 10:44 PM	Rate (0)
Essam Posts: 47 Rating: (0)	Dear All i have two motors moving in x and y axiz and i ame planing to contral them using s7 300 PLC is thear any way to send AUTOCAD DWG file from windos to the s7 300 so the motors can move exactly like the drawing. thanks Essam
Essam Posts: 47 Rating: (0)
Suggestion To thank Quote Answer

1/26/2013 5:03 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/11/2024 Posts: 6852 Rating: (1365)	Essam Dear All i have two motors moving in x and y axiz and i ame planing to contral them using s7 300 PLC is thear any way to send AUTOCAD DWG file from windos to the s7 300 so the motors can move exactly like the drawing. thanks Essam Hello , What about trying piece-wise linear (x-y) curve as trajectory of machine? Best regards Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

1/27/2013 8:01 PM	Rate (0)
pierre_g Posts: 67 Rating: (5)	Hello , To do that we use Sinumerik with CAM software. It is like a milling machine and spindle is the plasma. I did not use plc to do this job. Pierre
pierre_g Posts: 67 Rating: (5)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on