Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

plc

Created by: rodicaxpl at: 3/26/2016 12:40 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/26/2016 12:40 AM	Rate (0)
rodicaxpl Posts: 11 Rating: (0)	Hello, i work on a project and i need some informations about the procedure to connect a siemens 300 with a SIMODRIVE611 converter via the profibus module as well as the creation of two axis in SIMATIC MANAGER STEP7. Best regards.
rodicaxpl Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

3/27/2016 8:33 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 9/16/2023 Posts: 8042 Rating: (855)	Hello, Please download this link which will help you. HTH
	Last edited by: Min_Moderator at: 3/29/2016 3:22:32 PM Edit link to permanent one
Suggestion To thank Quote Answer

5/2/2016 5:01 AM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 9/27/2023 Posts: 3601 Rating: (284)	Hi, I checked you posted so many threads , I think they are belong to your same one project, How about you project now. From information you supplied, I think you want to use S7-300 to control SIMODRIVE 611A , spindle and axis. in my shop , If you have basic STEP 7 knowledge that will be no big problem.in our shop, we have couple of old m/c's --using Siemens S5-115U PLC control 611A spindle and 2 axis, if you need further help you can post you progress and question here. rodicaxpl Hello, i work on a project and i need some informations about the procedure to connect a siemens 300 with a SIMODRIVE611 converter via the profibus module as well as the creation of two axis in SIMATIC MANAGER STEP7. Best regards.
	If you like my comment, rate it (right top) or thank it (left bottom).
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on