Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem about ADI4

Created by: question at: 9/22/2009 4:37 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/22/2009 4:37 AM	Rate (0)
question Posts: 10 Rating: (0)	HI. I will reform a grinding machine with 802Dsl +ADI4 ,how to configure the ADI4 in the programming tool plc802d and 802d sl G/N Plus ,what the profibus address should be set on ADI4, Is it 15? It's said can reference the ADI4_SDB.PDF in the toolbox ,but there is no in mine . who have it ? thank you !
question Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

9/23/2009 6:20 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (51)	hi you can set the profibus address as 15.i am attaching the pdf regards ram Attachment ADI4_SDB.pdf (344 Downloads)

Suggestion To thank Quote Answer

9/24/2009 2:34 AM	Rate (0)
question Posts: 10 Rating: (0)	thank you ,
question Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

12/8/2009 5:05 PM	Rate (0)
question Posts: 10 Rating: (0)	I am rebuilding a machine with 802D sl + ADI4, there are 4 axises X Z C and sp ,axis X and Zwith a encoder,how to set the MD in the 802Dsl ?for example MD11240,30110 AND 30220 and so on?who have themanual about ADI4 used with 802DSL?thank you !
question Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

12/9/2009 10:36 AM	Rate (0)
Bilao Posts: 378 Rating: (47)	Hello, do you mean this one? best regards bilao Attachment ADI4_e[1].pdf (268 Downloads)
Bilao Posts: 378 Rating: (47)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on