8/12/2020 9:30 PM | |
Joined: 12/6/2016 Last visit: 6/12/2023 Posts: 57 Rating:
|
|
Al-Nassim Company |
|
8/12/2020 10:41 PM | |
Joined: 9/27/2006 Last visit: 8/14/2024 Posts: 12277 Rating:
|
Hello Ahmad; You could start by implementing Denilson Pagaia's suggestion in the following thread; you could make your VD100 retentive: https://support.industry.siemens.com/tf//ww/en/posts/s7-200-retentive-hsc/19409/?page=0&pageSize=10 The screenshot below (taken from the S7-200 System manual) shows how to make different memory areas retentive on power loss. You should keep the S7-200 System manual at hand when working with these CPUs, it is an invaluable reference: https://support.industry.siemens.com/cs/ww/en/view/1109582 Hope this helps, Daniel Chartier |
8/12/2020 10:54 PM | |
Joined: 12/6/2016 Last visit: 6/12/2023 Posts: 57 Rating:
|
Greetings to you I tried this earlier, but it didn't work
|
Al-Nassim Company |
|
8/12/2020 11:29 PM | |
Joined: 12/6/2016 Last visit: 6/12/2023 Posts: 57 Rating:
|
|
Al-Nassim Company |
|
8/12/2020 11:29 PM | |
Joined: 12/6/2016 Last visit: 6/12/2023 Posts: 57 Rating:
|
|
Al-Nassim Company |
|
8/12/2020 11:29 PM | |
Joined: 12/6/2016 Last visit: 6/12/2023 Posts: 57 Rating:
|
|
Al-Nassim Company |
|
Follow us on