Navigation

Problem to connect GPRS and ethernet port at the same time on IOT2050

Created by: Emerson Veras at: 4/13/2022 4:45 PM (1 Replies)

4/13/2022 4:45 PM	Rate (0)
Emerson Veras Member Joined: 4/6/2021 Last visit: 5/17/2022 Posts: 4 Rating: (0)	Hi, I made a tutorial to configure the IOT2050 with GPRS modem and I am getting it. But when connecting an ethernet port on IOT2050, GPRS loses connection. Basically, if it is off, GPRS has internet connection, but when I turn on plc ethernet port to ethernet port to IOT2050, GPRS loses internet connection. I want to use GPRS modem for internet connection and ethernet port to connect to a plc. Help me please
	Last edited by: Emerson Veras at: 04/13/2022 16:49:56 Last edited by: Emerson Veras at: 04/13/2022 16:51:48 Last edited by: Emerson Veras at: 04/13/2022 16:53:48
Suggestion To thank Quote Answer

4/14/2022 10:07 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 11/30/2023 Posts: 3290 Rating: (368)	Hi, which GPRS card are you using? We had one similar problem here, this was related to a single ZTE card. Best regards!

Suggestion To thank Quote Answer