Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem with connection

Created by: hanane at: 3/26/2011 6:49 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

3/26/2011 6:49 PM	Rate (0)
hanane Posts: 6 Rating: (0)	PLC => donwload module the message "connection with adapter is impossible" please help me
hanane Posts: 6 Rating: (0)	Last edited by: hanane at: 3/26/2011 7:22 PM
Suggestion To thank Quote Answer

3/26/2011 7:05 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Please translate in English. This is international version of forum with official English language. Best regards, Hristo Mihalev
	Last edited by: UMENCHO at: 3/26/2011 7:05 PM
Suggestion To thank Quote Answer

3/28/2011 8:57 AM	Rate (0)
zerepegro Posts: 183 Rating: (8)	Hello hanane; We need more details. What PCS7 version are you using? What kind of adapter are you trying to use to communicate with the system? What architecture have you got? Why don't you use PC internal (local)? Are you using a virtual machine?
zerepegro Posts: 183 Rating: (8)
Suggestion To thank Quote Answer

3/28/2011 5:15 PM	Rate (0)
hanane Posts: 6 Rating: (0)	version 7.1 pc adapter (mpi) no i didn't use a virtual machine an other question i desarchivate somme examples, but i dont knew how update the configuration of hardware
hanane Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

3/28/2011 5:31 PM	Rate (0)
zerepegro Posts: 183 Rating: (8)	hanane version 7.1 pc adapter (mpi) no i didn't use a virtual machine an other question i desarchivate somme examples, but i dont knew how update the configuration of hardware How did you configure the PG/PC interface? Did you set the baudrate right? Is it the same in your PLC?
zerepegro Posts: 183 Rating: (8)
Suggestion To thank Quote Answer

3/28/2011 8:41 PM	Rate (0)
hanane Posts: 6 Rating: (0)	in pg-pcinterface I selected PC internal (local) and it's the same in the PLC
hanane Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

3/29/2011 3:57 PM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 12/4/2024 Posts: 917 Rating: (63)	Hello hanahe, sorry, not sure I understood everything. To perform the PLC download the following operation needed: 1 - configure the HW configuration exactly as your PLC ? 2 - configured PC Station exctly as your ES (with adapter card in MPI configuration)? 3 - configured NETPRO with MPI connection ? 4 - downloaded the ES PC station HW configuration ? If not try to post step by step what you made with screenshot. Regards

Suggestion To thank Quote Answer

3/30/2011 8:23 AM	Rate (0)
zerepegro Posts: 183 Rating: (8)	Hello hanane; As far as I know is not possible to work in pc internal with a pc adapter. You should select in the PG/PC interface "PC Adapter".
zerepegro Posts: 183 Rating: (8)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on