Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with online in SCL

Created by: Deka at: 12/21/2009 9:52 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/21/2009 9:52 AM	Rate (0)
Deka Posts: 65 Rating: (0)	Hi, I have a problem with my online view in SCL. I open the source and go to "online". But I can't see the current values on the right field of the screen. The programm is really running. If I set a breakpoint, the CPU goes to HOLD and I can see the current values. It works. But in the normal online view I can't see any values. This problem doesn't occur in the complete source, only in parts of the source. Can anybody help me? Dennis
Deka Posts: 65 Rating: (0)
Suggestion To thank Quote Answer

12/21/2009 11:11 AM	Rate (0)
smiffy Platinum Expert Joined: 1/17/2007 Last visit: 5/31/2023 Posts: 1524 Rating: (522)	The monitor will only show you the code that actually being executed. Are you trying to monitor code lines that are not being executed due to conditions not being met? For example you have an 'IF' construct, the code that will be displayed will depend on whether the IF is evaluated as true or false. Take this example:- IF X > Y THEN // The values here will always be shown as this line of code is always executed ... // Values will be displayed for these lines only if X > Y ELSE ... // Values will be displayed for these lines if X <= Y END_IF;
	Programming today is the race between software engineers building bigger and better idiot proof programs, and the universe producing bigger and better idiots. So far, the universe is winning...
Suggestion To thank Quote Answer

12/21/2009 11:32 AM	Rate (0)
Deka Posts: 65 Rating: (0)	Hi, yes, I know it. But the code is executed definitely, but it is not shown on the right screen. I use SCL V5.3 + SP5. Dennis
Deka Posts: 65 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on