Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problems after CFC v6.1 to v7.0 migration

Created by: Alekkk at: 11/14/2008 8:35 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/14/2008 8:35 AM	Rate (0)
Alekkk Member Joined: 4/23/2008 Last visit: 6/28/2024 Posts: 3 Rating: (0)	Hi! I had the project with using CFC6.1. Recently I have tried to migrate to CFC7.0 and I have gotten some troubles: when I try to delete converted charts I get this message "Could not read OCM attributes. The system busy. Please try again.". The same message I get when I try to unchek "OCM possible" in properties dialog. If I try to delete the chart created in the CFC 7.0 - all have been OK. Do you know what is a reason of this problem?

Suggestion To thank Quote Answer

11/17/2008 12:54 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Have you tried after reorganizing the migrated project? If it still does not work,tryafter save-as with reorganization (slow) and a new project name.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/20/2009 2:01 PM	Rate (0)
creepy Regular Member Joined: 4/20/2009 Last visit: 10/11/2024 Posts: 2 Rating: (0)	While saving with reorganization (slow) the same errors appears. It's not even possible to delete the whole chart from the chart folder. Newly created charts can be deleted. Deletion from the runtime editor causes the following error: You cannot remove all the selected objects from the processing sequence. Only objects that are included more than once can be removed.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on