Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

process historian

Created by: GUWS at: 3/14/2023 6:14 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/14/2023 6:14 AM	Rate (0)
GUWS Bronze Member Joined: 4/18/2014 Last visit: 11/8/2024 Posts: 253 Rating: (5)	Hi , I am using two process historian as redundant , one is suspended and compression shows inactive and the another one is showing locked, the drive is almost full. I tried to switch the state but does'nt works is that is the reason? and why the Last in First out is not working? can i the database to some other location? please advise.

Suggestion To thank Quote Answer

3/16/2023 5:15 PM	Rate (0)
serendipity0 Advanced Member Joined: 2/3/2022 Last visit: 4/23/2024 Posts: 304 Rating: (27)	Hi! In order to help with your issue I would recommend reading the following section of the manual. https://support.industry.siemens.com/cs/ww/en/view/109809287/109450856459 Br!

Suggestion To thank Quote Answer

3/28/2023 9:53 AM	Rate (0)
Murof Platinum Member Joined: 8/3/2009 Last visit: 11/19/2024 Posts: 14212 Rating: (1775)	Hello GUWS If you have trouble with volume space on your HDD of the Process historian, perhaps this one could help: https://support.industry.siemens.com/cs/ww/en/view/109480122 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on