Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Programing Device VS 710 and CPU 315-2DP

Created by: mr83 at: 6/8/2010 8:07 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/8/2010 8:07 PM	Rate (0)
mr83 Posts: 3 Rating: (0)	Hello to everybody, I need help I had a CPU 315 with a CP 342-5 (Profibus) connected to a VS 710 (Vision). Now I want to change the CPU to a 315-2DP without the Profibus card (CP 342-5). If the program was made for CPU 315 with a CP 342-5 (Profibus) its necessary change something in the program if i change the CPU to a 315-2DP ? Thanks a lot Greatings to everyone
mr83 Posts: 3 Rating: (0)
Suggestion To thank

6/9/2010 8:00 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread Cominication between VS710 and CPU 315-2DP. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on