Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Protected hardware with password ( before communication )

Created by: LipeScofield at: 6/29/2009 4:26 PM (7 Replies)

Rating (0)

Thanks 1

8 Entries

6/29/2009 4:26 PM	Rate (0)
LipeScofield Posts: 1 Rating: (0)	The situation is as follows: I have a client who has a Siemens PLC (S7-300) which is locked by password. It is not a lock that allows communication with either the CPU (315 PN / DP), the client needs to access the blocks of the program to execute a change in the program due to a change in an instrument in the field. (Flow meter). Have some way to help you with this problem? Many thanks…
LipeScofield Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AdamLerch

6/29/2009 7:30 PM	Rate (0)
H-H Platinum Member Joined: 7/2/2008 Last visit: 9/30/2024 Posts: 928 Rating: (308)	Hello LipeScofield, I'm sorry but it's very hard to break this password. If there's a solution to break the password, it won't be here on Siemens forum. Try your luck with google. Best regards. H-H

Suggestion To thank Quote Answer

6/29/2009 7:50 PM	Rate (0)
Lucky123 Gold Member Joined: 12/20/2008 Last visit: 8/12/2024 Posts: 556 Rating: (236)	I think You shouldcall Siemens Tech Support, they are very helpful, if the client agrees to break it up, then Siemens might help you in such case, they have a backdoor password for such cases.

Suggestion To thank Quote Answer

7/27/2009 4:42 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	Can you remove MMC from the PLC???

Suggestion To thank Quote Answer

7/27/2009 4:47 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	sorry for my english ... it's not a problem to uploading programm from PLC ...

Suggestion To thank Quote Answer

7/27/2009 8:43 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	protivogas ... it's not a problem to uploading programm from PLC ... Hello, What do you mean? Perhaps this FAQ could clear the issue What options exist for assigning passwords? Regards, Hristo Mihalev

Suggestion To thank Quote Answer

8/21/2009 8:40 AM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	it's mean that the password protect can crack by the soft (too easy), and you can unprotect all block in user programm (it's need to extract the MMC from PLC). I thik that the best protection now- glue the MMC cars in PLC. :(

Suggestion To thank Quote Answer

9/28/2009 8:32 PM	Rate (0)
Manishkools Posts: 50 Rating: (1)	protivogas it's mean that the password protect can crack by the soft (too easy), and you can unprotect all block in user programm (it's need to extract the MMC from PLC). I thik that the best protection now- glue the MMC cars in PLC. :( how to crack password protect????
Manishkools Posts: 50 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on