Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PWM output in the form of current signal

Created by: Harsha69 at: 11/15/2014 5:16 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/15/2014 5:16 AM	Rate (0)
Harsha69 Posts: 8 Rating: (0)	Hello everyone Can we get the PWM output in the form of current signal ---------------- New subject after splitting from get an PWM output from a PLC S7-1200 with CPU 1212C.
Harsha69 Posts: 8 Rating: (0)	Last edited by: Min_Moderator at: 11/17/2014 9:15 AM Splitted
Suggestion To thank Quote Answer

11/15/2014 7:29 AM	Rate (0)
William_B Posts: 5225 Rating: (1195)	Harsha69 Hello everyone Can we get the PWM output in the form of current signal Hi there. The question is not very clear to me. If however you explain in more detail what your aim is, maybe then we will be able to help you. The more detail we have the more helpful we can be. Unless.. What I can tell you that it is possible to convert a PWM (Pulse Width Modulation) signal to analog by using an electronic component filter. That means if the PLC produces a 30% ON cycle pulse, you will be able to get ca. 3V from the filter's output. Feel free to use your favourite search engin to find more detail. Greetings. w
William_B Posts: 5225 Rating: (1195)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on