Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PXM20

Created by: Shakil_Vora at: 12/20/2019 7:42 AM (7 Replies)

Rating (5)

Thanks 2

8 Entries

12/20/2019 7:42 AM	Rate (1)
Shakil_Vora Bronze Member Joined: 12/31/2018 Last visit: 3/10/2024 Posts: 96 Rating: (4)	Hello Everyone!! Can you guys tell me What is the Default Password for PXM20? I could not find anywhere in Documents.

Suggestion To thank Quote Answer

12/20/2019 9:30 AM	Rate (2)
ezhkov Posts: 8 Rating: (2)	Hi, Default password is login's first letter (capital). Basic operator - B Standard operator - S Extended operator - E Customer admin - C
ezhkov Posts: 8 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Shakil_Vora

12/20/2019 1:59 PM	Rate (1)
CJ. Gold Expert Joined: 11/8/2017 Last visit: 11/12/2024 Posts: 341 Rating: (195)	Hi, Just to add that the user names, passwords, groups are stored within the primary server PX controller. These can be viewed / modified from within the PX's Global chart. There is also a hidden 'Internal' user that provides the highest possible level of access (press the + button 3 times at the user account screen to make it appear). Newer versions of the PX firmware force the user to change the Internal user password when logging in for the first time. Older versions of firmware do not force the change - so I don't think it's wise to share this password on a publicly accessible forum - I will PM you the details. Regards,

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Shakil_Vora

1/10/2024 3:46 PM	Rate (0)
Hexersoft Joined: 1/10/2024 Last visit: 11/7/2024 Posts: 1 Rating: (0)	Hello good afternoon, I wanted to ask you about the issue of the PXM20 commenting that there is a hidden user and that you cannot send it in public? Could you please send it to me? Would it be possible? Another question I have is: Can the PXM20 passwords be reset without having the previous passwords? and without having the PXC52 controller project thank you so much greetings

Suggestion To thank Quote Answer

1/10/2024 5:03 PM	Rate (1)
CJ. Gold Expert Joined: 11/8/2017 Last visit: 11/12/2024 Posts: 341 Rating: (195)	Hi, I'll send you the default 'Internal' user password in a PM. The only way to change user accounts and passwords is by changing them in the PX that is defined as the Primary Server device. You can either do this from the XWorks project; from the PXM20; or from Desigo Insight (but not from Desigo CC). If you have only 1 PX - then this will be the primary server device - if you have multiple PXs, then only one of them would be defined as the primary server device. The PXM20 refers to the PX that is the primary server device in order to retrieve the available user names and passwords. The 'Internal' user is (or should be) separate to this. Regards,

Suggestion To thank Quote Answer

9/10/2024 4:01 PM	Rate (0)
AutoGen_3502833 Joined: 9/10/2024 Last visit: 10/1/2024 Posts: 1 Rating: (0)	CJ. :PM
	Last edited by: U_eec55b95-314c-40aa-9a56-008f31195951 at: 09/10/2024 16:02:13
Suggestion To thank Quote Answer

11/11/2024 3:38 PM	Rate (0)
AutoGen_1783370 Joined: 9/26/2023 Last visit: 11/12/2024 Posts: 1 Rating: (0)	Hello ,I have the same problem, we don't know where we can find the passwords for an PXM 20,can you send me the internal password in pm ? Best regards.

Suggestion To thank Quote Answer

11/12/2024 12:49 AM	Rate (0)
CJ. Gold Expert Joined: 11/8/2017 Last visit: 11/12/2024 Posts: 341 Rating: (195)	Hi, Please check your PMs. Regards,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on