8/17/2020 8:52 AM | |
Joined: 6/2/2019 Last visit: 7/28/2024 Posts: 10 Rating:
|
Hello experts I have a 1215C controller connected to the V90 with Profinet. I run an EPOS block and would love to understand two things. 1. How can I assign him a new value for the location he is in? 2.Can I set a value for speed / acceleration and not in percentages? And if not I would love to know where he gets his nominal speed and acceleration? thank you Erez ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 08/17/2020 12:44:01New subject after splitting |
|
8/17/2020 12:59 PM | |
Joined: 10/11/2006 Last visit: 9/4/2024 Posts: 5902 Rating:
|
Hello, you can use SinaPos in S7-1200, too. SINAMICS V90 PN: Basic Positioner (EPos) https://support.industry.siemens.com/cs/ww/en/view/109747750 Reference values are P2000 - P2003 |
With best regards, |
|
Follow us on