Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Read current IP details in LAD

Created by: jon_hill988 at: 3/23/2012 10:54 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/23/2012 10:54 AM	Rate (0)
jon_hill988 Posts: 10 Rating: (0)	Hi, I am using T_CONFIG to set the IP address of the PLC and was wondering if there is a block to do the oposite, read back the currently set IP address into my lader program/data blocks. Thanks. Jon
jon_hill988 Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

3/23/2012 11:13 AM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 1/30/2025 Posts: 4399 Rating: (1467)	Hi, Why do you need to know that?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

3/23/2012 11:25 AM	Rate (0)
jon_hill988 Posts: 10 Rating: (0)	It's a nice to know rather than a need to know, I want to use it to auto populate the fields on my user web page form to change the IP address, Subnet Mask and Default Gateway. The idea is it will prevent the user having to type in the whole thing if they only want to change part of the settings.
jon_hill988 Posts: 10 Rating: (0)	Last edited by: jon_hill988 at: 3/23/2012 4:38 PM
Suggestion To thank Quote Answer

5/14/2012 4:32 PM	Rate (0)
buckler Member Joined: 1/5/2011 Last visit: 5/23/2024 Posts: 2 Rating: (0)	This is exactly what I would like to do. I want to display the IP on the attached profinet HMI to aid in future connectivity.
	Last edited by: buckler at: 5/14/2012 4:32 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on