Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

read the led statuses of a 400H redundant system

Created by: ridiska at: 6/14/2012 9:41 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/14/2012 9:41 AM	Rate (0)
ridiska Posts: 3 Rating: (0)	Hello Hamid, I am trying to read the led statuses of a 400H redundant system and it works onlyfor indexes (W#16#000)2, 3, 4, 5, 6, B, C, D, E, F, 10, 12, 13. As for the rest of them -SFC51 generates the error code W#16#8083 (INDEX wrong or not permitted). What could be the problem? why isthis error generated only for some indexes and not for all of them? Thanking in advance. Dima
ridiska Posts: 3 Rating: (0)	Last edited by: O_Moderator at: 6/14/2012 9:55 AM new subject after splitting from /tf/WW/en/Posts/75551#top
Suggestion To thank Quote Answer

6/14/2012 10:46 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/10/2024 Posts: 6849 Rating: (1365)	ridiska Hello Hamid, I am trying to read the led statuses of a 400H redundant system and it works onlyfor indexes (W#16#000)2, 3, 4, 5, 6, B, C, D, E, F, 10, 12, 13. As for the rest of them -SFC51 generates the error code W#16#8083 (INDEX wrong or not permitted). What could be the problem? why isthis error generated only for some indexes and not for all of them? Thanking in advance. Dima Hello , These are LEDa existing in most of S7400H CPUs I have ever seen.About the other indices and LEDs,I think they are not common very on S7 400H.To be sure, just check the existing LEDs on your CPU and only try to read their status! system function manual LED ID (only relevant for SSL-ID W#16#0174) W#16#0001: SF (group error) W#16#0002: INTF (internal error) W#16#0003: EXTF (external error) W#16#0004: RUN W#16#0005: STOP W#16#0006: FRCE (force) W#16#0007: CRST (cold restart) W#16#0008: BAF (battery fault/overload, short circuit of battery voltage on bus) W#16#0009: USR (user-defined) W#16#000A: USR1 (user-defined) W#16#000B: BUS1F (bus error interface 1) W#16#000C: BUS2F (bus error interface 2) or BUS5F (bus error interface 5) with the CPUs 414-3 PN/D 416-3 PN/DP and 416F-3 PN/DP W#16#000D: REDF (redundancy error) W#16#000E: MSTR (master) W#16#000F: RACK0 (rack number 0) W#16#0010: RACK1 (rack number 1) W#16#0011: RACK2 (rack number 2) W#16#0012: IFM1F (interface error interface module 1) W#16#0013: IFM2F (interface error interface module 2) Hope this helps Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

6/14/2012 11:13 AM	Rate (0)
ridiska Posts: 3 Rating: (0)	Thank you for your promt reply. Actually what I need is index W#16#0008: BAF but this one is amongthose for which the error 8083is generated. The CPU is a 414-4H and Iam reading the statuses of existing LEDs only. Thanks
ridiska Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

6/14/2012 11:35 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/10/2024 Posts: 6849 Rating: (1365)	ridiska Thank you for your promt reply. Actually what I need is index W#16#0008: BAF but this one is amongthose for which the error 8083is generated. The CPU is a 414-4H and Iam reading the statuses of existing LEDs only. Thanks Hello again, This should be tested on a real S7 400H.But you have other ways to evaluate battery failure on S7 CPUs. Check this title: 1.17 Power Supply Error Organization Block (OB81) in this manual: http://support.automation.siemens.com/WW/view/en/44240604 B#16#39/B#16#38 B#16#26: Back-up voltage in at least one redundant central rack failed/problem eliminated (BAF) Hope this helps Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on