Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Recipe synchronisation on Comfort panel

Created by: sba at: 7/29/2013 1:49 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/29/2013 1:49 PM	Rate (0)
sba Advanced Member Joined: 3/22/2012 Last visit: 4/24/2023 Posts: 6 Rating: (0)	I have 2 comfort panels TP15"00 comfort. They shoudl have the same visualisation. I've made a recipe on one panel. Is there a possibility to synchronize the recipes on the second panel? Thanks in advance.

Suggestion To thank Quote Answer

7/31/2013 2:45 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 3/30/2023 Posts: 1557 Rating: (161)	Hello sba, in this case you must use the area pointer "Datarecord". You activate this area pointer in every project and choose in both pointers the same datarange in the plc. More information about area pointers can be found in the WinCC helpsystem.

Suggestion To thank Quote Answer

7/31/2013 3:14 PM	Rate (0)
sba Advanced Member Joined: 3/22/2012 Last visit: 4/24/2023 Posts: 6 Rating: (0)	Hello Sandman, Thank you for the response, But I think I was not very clear in my question. The question is if I make several datarecords one one panel, I want those data sets to appear on the other panel also.So if I save a data record on one panel, I want this to be visible on the other. Otherwise every time I make a change in the recipes I have to do it on both panels. If I couldcopy the file where the recipes are saved from one panel to the other woudl that solve my problem? Any suggestion?

Suggestion To thank Quote Answer

3/20/2014 3:02 PM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 5/29/2023 Posts: 851 Rating: (5)	kindly, how did you solve this problem?
	... thank you ...
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on