Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Redundancy System_S7400

Created by: Swami_GS at: 6/19/2014 2:17 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/19/2014 2:17 PM	Rate (0)
Swami_GS Posts: 43 Rating: (0)	Hello Experts, I have few doubts on redundancy System. One of my client wantsredundant system with S7 400. Is it possible, if so what are the Hardware required for it(Specific TCP card? if so?) and first i need to test it with Simulator, is it possible to run PLCSIM and test it in virtual Network. Please help me ASAP. Thanks in Advance Regards, Swami
Swami_GS Posts: 43 Rating: (0)
Suggestion To thank Quote Answer

6/19/2014 3:32 PM	Rate (0)
TIBI68 Gold Member Joined: 12/1/2009 Last visit: 10/27/2024 Posts: 672 Rating: (147)	Dear Swami_GS, I advise you to go through the information given on this page below: http://w3.siemens.com/mcms/programmable-logic-controller/en/simatic-s7-controller/s7-400/cpu/fault-tolerant-cpus/Pages/Default.aspx There is no way you can test the redundancy withPLCSIM. Check out this video: https://www.youtube.com/watch?v=cwHHqCoGKeA Best Regards.
	Give us your feedback and show us your respect! We take our free time to support you with our knowledge and experience. If this post is helpfull to you kindly click on "Rate" or "Thank".
Suggestion To thank Quote Answer

6/22/2014 2:42 PM	Rate (0)
Swami_GS Posts: 43 Rating: (0)	Dear TIB168, Thanks for your quick response, i will look into the links and incase if i have some queires i will update here in the forum. Regards, Swami
Swami_GS Posts: 43 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on